ATV Riders: Model shown is recommended for use by riders age16 years and older. Yamaha recommends an approved training course. See your dealer or call 1-800-887-2887. ATVs can be hazardous to operate. Side-by-Side Riders: Always wear your seat belt, helmet, eye protection and protective clothing. (c)2020 Yamaha Motor Corporation, U.S.A. All rights reserved. • YamahaMotorsports.com!

Inventory Unit Detail

2023 KTM 450 XCF W

$7,999.00

$7,999.00

Key Features

New/Used Used
Usage2010 Miles
Availability In Stock
LocationSteve's Sports Center
Primary ColorORG
Stock # C-1056
VIN 2348
Condition Excellent

Product Features

Dealer Notes
THIS BIKE BOOKS FOR 9190.00 CUSTOMER LOOKING FOR A QUICK SALE!!

Description

With impressive and efficient performance, a lightweight frame and subframe, race-proven bodywork and ergonomics, a compact exhaust system as well as exceptional cooling and suspension, the KTM 450 XCF-W is sure to remain the benchmark for all others to follow.

Engine & Exhaust
  • Engine: Combining compact dimensions with immense power output, this 450 cc fuel-injected SOHC powerplant is the most powerful and refined on the market. Its class-leading power delivery is available throughout the entire rev range and with its low weight of only 29.2 kg (64.3 lbs), is also the lightest 450 mills engine out there.
  • Cylinder Head: The KTM 450 XCF-W engine is fitted with a compact SOHC cylinder head for optimal mass centralization. The head configuration promises efficient power delivery and unrivaled performance. A single overhead camshaft also ensures optimal gas flow, with low-friction rocker arms and timing chain guides guarantee consistent performance throughout the rpm range.
  • Crankshaft: Located in an ideal position close to the center of gravity, The KTM 459 XCF-W's crankshaft contributes to easier handling. It utilizes a short connecting rod, which makes for an overall compact and lightweight engine. The engine's pressurized lubrication system provides the necessary oil feed for the big end bearing. This design has a direct benefit for the crankshaft with extended service intervals. So just pin it, all day long.
  • Engine Cases And Covers: A lightweight engine case design allows for a very centralized shaft configuration while contributing to an efficient centralization of mass. Additionally, the engine covers feature a smart surface structure that reduces the wear caused by the rider's boots, keeping them looking as fresh as the day it rolled off the production line, while reinforced clutch and engine covers mean the engine case is more robust.
  • Transmission: The KTM 450 XCF-W features a robust 6-speed transmission made by PANKL Racing Systems. The gears are made of a strong, forged raw material, ensuring the highest durability and reliability level. All four-stroke engines are fitted with a gear sensor, giving the option of different engine characteristics for each gear.
  • Engine Management System: The state-of-the-art Keihin Engine Management System, with electronic fuel injection, features a 42 mm throttle body with separate systems for cold starting and idle adjustment. The throttle cable mount also allows for easy access and a smooth routing of cables for crisp throttle response, every time.
  • Cylinder And Piston: Inside the short 95 mm bore cylinder, is an extremely lightweight, forged bridged box-type piston made by König. Despite its incredibly low weight, it has an extra rigid structure for enhanced durability. Thanks to its lightweight construction, the oscillating masses are low, giving the engine extremely lively characteristics. The compression ratio of 12.75:1 delivers an exceptional engine performance and reduces the risk of engine knocking.
  • Balancer Shaft: The multifunctional side-mounted counter balance shaft masterfully balances all the oscillating forces, while also driving the water pump. It effectively keeps engine vibrations to a minimum, resulting in the smoothest ride even at the highest engine speeds.
  • Clutch: The KTM 450 XCF-W is fitted with the extremely durable, KTM-developed DDS clutch (damped diaphragm steel), with a wear-free steel basket and heat-resistant clutch plates. It uses a diaphragm spring instead of the usual coil springs, which results in considerably easier clutch action. Additionally, the Brembo hydraulic system provides easy and precise clutch modulation throughout the entire operating temperature range.
  • E-Starter: The standard electric starter on the KTM 450 XCF-W uses a proven starter drive and a strong starter motor made by Mitsuba. As demonstrated time and time again, it provides quick and reliable starting, saving you precious time and energy when you need it most.
  • Cooling: Keeping the engine cool when the going gets tough comes courtesy of a pair of radiators, mounted close to the center of gravity. These make use of CFD technology (Computational Fluid Dynamics) and clever coolant circuit routing, achieving optimum engine temperature for the highest performance, in all conditions. Above all, the delta distributor, integrated into the frame triangle, features a large center tube for highly efficient coolant flow, as well as radiator fans as standard on all 4-stroke models.
  • Exhaust: Packing a punch and delivering an unmistakable engine note, all 4-Stroke KTM enduro models feature an easy-access two-piece header pipe that can be disassembled easily to allow access to the rear shock. An aluminum muffler sleeve has a short and compact profile.
Chassis
  • Frame: All KTM XC-W and XCF-W models feature high-tech, lightweight Chromoly steel frames with race-derived geometry, optimal stiffness, and unparalleled feedback for the rider. This translates into a playful handling character, with remarkable stability at speed - not to mention FACTORY RACING style thanks to the striking orange coating. The subframe is made of extra-light and ultra-stable aluminum profiles, weighing less than 900 grams providing rear fender stability and durability in the event of a loop out.
  • Swingarm: The KTM 450 XCF-W features a one-piece aluminum swingarm, which is manufactured using a gravity die-cast production process. This results in exeptional strength at the lowest possible weight and the perfect flex behavior.
  • Wheels: KTM uses lightweight, CNC-machined hubs and high-end GIANT rims on all XC-W and XCF-W models. These guarantee maximum stability and the bare minimum weight, while aluminum spoke nipples feature an innovative design, which reduces the need to continuously tighten the spokes.
  • Tires: With help from top riders, the KTM 450 XCF-W makes use of a Dunlop MX33 rubber on the front, and a Dunlop AT81 on the rear, which offer superior grip, slide control, bump absorption, and enhanced durability for exceptional all-around performance.
  • Suspension: For 2023, all KTM XC-W and XCF-W models feature top-shelf WP suspension systems, focused on providing all riders of all levels with unmatched performance and consistency across all terrain types.
  • Front Suspension: Leading the way in enduro-focused suspension, these adjustable 48 mm diameter WP XPLOR upside-down forks provide unmatched performance from both expert and amateur riders alike. Adjustability also comes easily, with compression damping dialed in on the left fork and rebound on the right.
  • Rear Suspension: The race-proven and fully adjustable WP XPLOR shock absorber features conical bushings between the pistons that allow for reduced suspension fade and wear. And, not only is this PDS rear suspension design the of choice of champions in the quest for podiums, but it also leads the way when it comes to providing maximum traction for the rear wheel.
  • Brakes: When it comes to bringing this machine to a stop, you'll be happy to have high-tech Brembo brake calipers and lightweight wave discs doing the work. These also take years of competitive racing into account, providing the perfect combination of ideal pad density and steel quality for longevity and consistent feel.
  • Fuel Tank: All KTM enduro models are fitted with lightweight polyethylene tanks, with a 1/4-turn bayonet-style filler cap makes for quick and easy operation. The integrated fuel pump ensures a direct feed to the injectors, while a 90° connector provides protection against damage. The tank is also manufactured using see-through plastic, so riders are able to gauge fuel levels at a glance and on the go.
  • Airbox: The easy-access airbox on the KTM 450 XCF-W ensures optimal flow dynamics, thanks to specially designed intake snorkels. This means air is force-fed into the motor, resulting in the perfect balance of power and throttle response. Keeping the air clean, is a large Twin-Air air filter fitted to a rigid cage for ideal placement at all times.
Ergonomics & Comfort
  • Handlebar: All KTM XCF-W models are equipped with adjustable, high-strength aluminum tapered handlebars made by NEKEN. These can be mounted in four different positions. Standard with ODI vulcanized grip on the right side and a comfortable ODI lock-on grip on the left, your only worry is hanging on, and letting rip.
  • Footpegs: Self-cleaning footpegs prevent mud from clogging up the pegs, even when dragging them through deep ruts. This means your boots maintain their grip, and you maintain your focus on the trail.
  • Seat: Go ahead, take a seat. The 2023 KTM 450 XCF-W's seat is covered in grippy black vinyl, and is perfectly shaped to allow riders complete freedom of movement, but comfortable enough to maintain longer sessions in the saddle.
Bodywork & Graphics
  • Decals: Drawing inspiration from the RED BULL KTM FACTORY RACING TEAM, the 2023 KTM 450 XCF-W features an orange-coated frame and boasts a bold 90s inspired color scheme, using the tried and tested in-mold graphics application for greater friction and fade resistance, meaning your steed will look factory-fresh after even the toughest time spent on the trails.
Software & Electronics
  • Battery & Wiring Harness: The KTM 450 XCF-W is fitted with a time-proven electrical system, powered by a super lightweight 2 Ah lithium-ion starter battery. The wiring harness also has most of the electrical components carefully positioned into a common area below the seat, making them easily accessible.
Engine Specifications
  • Transmission: 6-speed
  • Starter: Electric starter
  • Stroke: 63.4 mm
  • Bore: 95 mm
  • Clutch: Wet, DDS multi-disc clutch, Brembo hydraulics
  • Displacement: 449.9 cm³
  • EMS: Keihin EMS
  • Design: 1-cylinder, 4-stroke engine
Chassis Specifications
  • Weight (without fuel): 105.5 kg
  • Tank capacity (approx.): 9.2 l
  • Front brake disc diameter: 260 mm
  • Rear brake disc diameter: 220 mm
  • Front brake: Disc brake
  • Rear brake: Disc brake
  • Chain: X-Ring 5/8 x 1/4"
  • Frame design: Central double-cradle-type 25CrMo4 steel
  • Front suspension: WP XPLOR-USD, Ø 48 mm
  • Ground clearance: 355 mm
  • Rear suspension: WP Xplor PDS shock absorber
  • Seat height: 960 mm
  • Steering head angle: 63.5 °
  • Suspension travel (front): 300 mm
  • Suspension travel (rear): 310 mm
NOTES:
The illustrated vehicles may vary in selected details from the production models and some illustrations feature optional equipment available at additional cost. All information concerning the scope of supply, appearance, services, dimensions and weights is non-binding and specified with the proviso that errors, for instance in printing, setting and/or typing, may occur; such information is subject to change without notice. Please note that model specifications may vary from country to country. In the case of coated surfaces, there may be color differences due to the usual process fluctuations. The consumption values stated refer to the roadworthy series condition of the vehicles at the time of factory delivery.

Engine

Engine Type 1-cylinder, 4-stroke engine
Displacement 449.9 cm³
Fuel System Keihin EMS

Chassis

Front Suspension WP XPLOR-USD, Ø 48 mm
Front Brakes Disc brake
Rear Suspension WP Xplor PDS shock absorber
Rear Brakes Disc brake

Dimensions

Dry Weight 105.5 kg
Fuel Capacity 9.2 L
Ground Clearance 355 mm
Seat Height 960 mm

Transmission

Transmission 6-speed
Final Drive Chain: X-Ring 5/8 x 1/4 in.

Shopping Tools